Jump to content

Stub Series Terminated Logic

From Wikipedia, the free encyclopedia

Stub Series Terminated Logic (SSTL) is a group of electrical standards for driving transmission lines commonly used with DRAM based DDR memory IC's and memory modules. SSTL is primarily designed for driving the DDR (double-data-rate) SDRAM modules used in computer memory; however, it is also used in other applications, notably some PCI Express PHYs and other high-speed devices.[1]

Four voltage levels for SSTL are defined:

  • SSTL_3, 3.3 V, defined in EIA/JESD8-8 1996
  • SSTL_2, 2.5 V, defined in EIA/JESD8-9B 2002 used in DDR among other things.
  • SSTL_18, 1.8 V, defined in EIA/JESD8-15A, used in DDR2 among other things.
  • SSTL_15, 1.5 V, used in DDR3 among other things.

SSTL_3 uses a reference of 0.45 * VDDQ (1.5 V). SSTL_2 and SSTL_18 reference a voltage that is exactly VDDQ / 2 (1.25 V and 0.9 V respectively).[2]

SSTL_3 and SSTL_2 support two termination classes (50 ohm or 25 ohm load). SSTL_18 only supports one (25 ohm load).

See also

[edit]

References

[edit]
  1. ^ Jaci Chang Design Considerations for the DDR3 Memory Sub-system. Jedex, 2004, p. 4. http://www.jedex.org/images/pdf/samsung%20-%20jaci_chang.pdf
  2. ^ Tom Granberg Handbook of Digital Techniques for High-Speed Digital Design. Pearson Education, 2004, p. 160-161.
[edit]

JEDEC homepage links; require (free) login: