Jump to content

E-mu Emax

From Wikipedia, the free encyclopedia
E-mu Emax (1986)

The Emax was a line of samplers, developed, manufactured, and sold by E-mu Systems from 1986 to 1995. Sold alongside their more expensive Emulator II and III samplers, the Emax line was conceived after the release of the Akai S-612 and Sequential Prophet 2000, and was designed to compete for the lower end of the sampling market.

The name Emax can refer to one of two specific models, the Emax (which was grey), and the Emax II (which was black). The Emax is sometimes referred to as the Emax I or the Emax 1000 to avoid confusion between the two models (although E-mu Systems never referred to it this way, there is an internal control label that says EMAX 1000 inside every unit).

Emax

[edit]

The original Emax was released in 1986, as a low cost version of the Emulator II. The base model cost $2,995; a rack version was also available for $2,695. Although it was fairly similar to the Emulator II in sampling specifications, the Emax used much more reliable parts, and stored sounds on 3½" floppy disks, as opposed to the more antiquated 5¼" floppy disks that the Emulator used.[citation needed]

E-mu Emax SE (1988)

Several upgrades were available for the Emax during its lifetime. The Emax HD featured a 20 megabyte hard drive for storing samples. The Emax SE added an additive synthesis engine that let the user create sounds from scratch. The Emax Plus added external SCSI device capability in addition to the other updates.[citation needed]

Sample memory remained the same at 512 KB for all models. SCSI can be retrofitted to second and third revision motherboards and was standard on the final model the Plus. The Emax was discontinued in 1989 and replaced by Emax-II[citation needed]

Emax II

[edit]

The Emax was replaced in 1989 by the Emax II and Emax II Turbo. Although the Emax II was a true 16-bit sampler with more polyphony, it also used digital filters and components, which sounded noticeably different from the original's analogue filter chips. The Emax II also sported a higher pricetag; a base model cost $3,595, while a fully expanded model could cost as much as $8,000.[citation needed] Nevertheless, the Emax II found a niche among many professionals due to its large and varied sample library[citation needed], and it enjoyed the longest production run of any E-mu product.[citation needed]

The EMAX II has different versions, labeled between 2201 and 2214, including mono and stereo versions. The Emax II Turbo, released in 1990, added more built-in sample memory (8 Mb from factory) and an internal SCSI Hard Disk.[citation needed]

E-mu ESI-32 (1994/1995) [1]

In 1995, the Emax II was discontinued, replaced by the rackmountable ESi-32, and later the ESI-4000 and the ESI-2000.

Notable users

[edit]

References

[edit]
  1. ^ "E-MU Product History". E-MU Systems. Archived from the original on 2011-08-09.